Home|product
Chinese
search
x
    Product Menu

    PRODUCTS

    EMC General Test Equipments
    + Multifunctional Immunity Simulator
    + ESD Simulators
    + EFT/Burst Simulators
    + Surge Simulator
    + CDN for Power Line in Transient Immunity Test
    + CDN for Communication Cable in Transient Immunity Test
    + Radio-Frequency Conducted Simulator
    + CDN for RF Conducted Immunity Test
    + EM Clamp
    + Power Frequency Magnetic Field Simulator
    + AC/DC Magnetic Field Simulator
    + Pulse Magnetic Field Simulators
    + Damped Oscillatory Magnetic Field Simulator
    + Power Fail Simulator
    + DC Power Fail Simulator
    + Ring Wave Simulators
    + Fast/Slow Damped Oscillatory Wave Simulator
    + Common-Mode Conducted Immunity Simulator
    + Software
    Automotive EMC Test Equipments
    + Automotive ESD Simulator
    + Transient Immunity Simulator
    + Automotive Load Dump Simulator
    + Automotive Voltage Variation Simulator
    + Vehicle-mounted Arbitrary Waveform Simulator
    + ISO 7637-4
    + Automotive Transient Disturbance Simulator
    + Automotive BCI Test System
    + Low Frequency Magnetic Field Immunity Test System
    + Automobile Transient Pulse Simulator
    + High Voltage Noise Simulator
    + Vehicle Power Supply Circuit Surge Simulator
    + Vehicle Multimedia Voltage Disturbance Simulator
    + Ripple Signal Generator
    + Voltage Ripple Disturbance Simulator
    + Electro-mobile Vehicles Pulse Disturbance Generato
    + Automotive Spark Simulator
    + Electric Vehicle High Voltage Performance Test System
    + Artificial Network
    + Balanced / Unbalanced Transformers
    + Capacitance Coupling Clamp
    + Stripline
    + TEM Cell
    + Automotive Immunity Test Software
    + Calibration Accessories
    + Low-k Dielectric Material for Laboratory Test
    Military Test Equipment
    + Electrostatic Sensitivity for Electric Initiating
    + 300KV ESD Testing System
    + MIL-STD-461 Series/ GJB 151、181 Series
    + Spike Surge Voltage Simulator
    + Line Impedance Stabilization Network
    Lightning Effect Test Equipments
    + High Voltage Attachment Points Partition Test System
    + Lightning Direct Effect Test System
    + Lightning Indirect Effect Test System for Airborn Equipment
    + Voltage Spike Test System
    + Induced Signal Susceptibility Test System
    System Integration
    + General EMI Test System
    + General EMS Test System
    + Automotive EMI Test System
    + Automotive EMS Test System
    + Military EMI Test System
    + Military EMS Test System
    + Anechoic Chamber
    High Voltage Test Equipments
    + Impulse Current Test System
    + Impulse Current Generator
    + Surge Simulator
    + Coupling /Decoupling Network
    + Decoupling Network
    + Action Load Network Power
    + SPD Testers
    + Customization for HV Test Equipment
    + Impulse Voltage Test System
    + Measurement/Control Software
    + Accessories
    Product Compliance Test Equipment
    + Product Compliance Tester for Communication Power
    + Power Induction/Contact Simulator
    + High Power Short Time Overcurrent Simulator
    + Pulse Voltage Withstand Tester
    + High Voltage Pulse Simulator
    Customization for Non-EMC Equipment
    + Switching Device for Capacitor Endurance Test
    Agency Equipment
    + EMI Receiver
    + Power Amplifier
    + RF Accessories
    + Current Injection Probe
    ANSI Standards
    CISPR Standards
    EN Standards
    GB/T Standards
    GJB Standards
    IEC Standards
    ISO Standards
    ITU-TK Standards
    Other standards
    QC Standards
    SJT Standards
    TY-T Standards
    UL Standards
    YD-T Standards
      Impulse Current Simulator S10C series
      Model:S10C series

      Profile

      The impulse current simulator S10C series is designed as per IEC 61643-11 and GB/T 18802.11
      PDFConsultation

      Online customized according to your needs>>

        Share
      • Feature
      • Standard
      • Parameter
      • Fitting
      • Services
      • Video
      The impulse current simulator S10C series is designed as per IEC 61643-11 and GB/T 18802.11, which is capable of generating 8/20 μs short-circuit current waveform with maximum voltage 10 kV and current 80 kA and features with easy-to-operate and highly reliability. Equipped with coupling/decoupling network and ten-way distribution networks SPN 10, up to ten EUTs can be tested under active or passive mode. Together with MAS 3000, the waveform data can be measured and analyzed professionally.

      Features:
      > 5.7” Color touch screen; 
      > Max. test current 80 kA; 
      > Equipped with MAS 3000, waveform measurement and analysis can be realized; 
      >Ten-way distribution networks are available for customization; 

      > Support customization for specific requirement;



      Naming Rule

      *Offer customized product according to customer’s requirement.

      • IEC 61643-1
      • GB/T 18802.11

      Technical Parameters-S10C2000

      Test Current

      1 kA ~ 20 kA, ±10%

      Charging Voltage

      0.5 kV ~ 10 kV

      Current Waveform

      Rise time (1.25* Tr): 8 μs, ±10%

      Duration (1.18*Tw): 20 μs, ±10%

      Polarity

      Positive/ negative/ alternative

      Source Impedance

      0.5 Ω

      Repetition (time for single pulse)

      5 s ~ 1000 s (The minimum time is subjected to test voltage)

      Counter

      1~10000

      Phase Sync.

      0° ~ 360°45 Hz ~ 65 Hz

      Pulse Current Monitor

      BNC output, 500 A: 1 V

      Trigger Mode

      Manual, Auto, External Trigger

      Dimension

      19” / 6U

      Weight

      Approx. 50 kg

      Technical Parameters-S10C4000

      Test Current

      2 kA ~ 40 kA, ±10%

      Charging Voltage

      0.5 kV ~ 10 kV

      Current Waveform

      Rise time (1.25* Tr): 8 μs, ±10%

      Duration (1.18*Tw): 20 μs, ±10%

      Polarity

      Positive/ negative/ alternative

      Source Impedance

      0.25 Ω

      Repetition (time for single pulse)

      5 s ~ 1000 s (The minimum time is subjected to test voltage)

      Counter

      1~10000

      Phase Sync.

      0° ~ 360°45 Hz ~ 65 Hz

      Pulse Current Monitor

      BNC output, 500 A: 1 V

      Trigger Mode

      Manual, Auto, External Trigger

      Dimension

      19” / 6U*2

      Weight

      Approx. 100 kg

      Technical Parameters-S10C6000

      Test Current

      3 kA ~ 60 kA, ±10%

      Charging Voltage

      0.5 kV ~ 10 kV

      Current Waveform

      Rise time (1.25* Tr): 8 μs, ±10%

      Duration (1.18*Tw): 20 μs, ±10%

      Polarity

      Positive/ negative/ alternative

      Source Impedance

      0.166 Ω

      Repetition (time for single pulse)

      5 s ~ 1000 s (The minimum time is subjected to test voltage)

      Counter

      1~10000

      Phase Sync.

      0° ~ 360°45 Hz ~ 65 Hz

      Pulse Current Monitor

      External, optional

      Trigger Mode

      Manual, Auto, External Trigger

      Dimension

      19” / 35U

      Weight

      Approx. 150 kg

      Technical Parameters-S10C8000

      Test Current

      4 kA ~ 80 kA, ±10%

      Charging Voltage

      0.5 kV ~ 10 kV

      Current Waveform

      Rise time (1.25* Tr): 8 μs, ±10%

      Duration (1.18*Tw): 20 μs, ±10%

      Polarity

      Positive/ negative/ alternative

      Source Impedance

      0.166 Ω

      Repetition (time for single pulse)

      5 s ~ 1000 s (The minimum time is subjected to test voltage)

      Counter

      1~10000

      Phase Sync.

      0° ~ 360°45 Hz ~ 65 Hz

      Pulse Current Monitor

      External, optional

      Trigger Mode

      Manual, Auto, External Trigger

      Dimension

      19” / 35U

      Weight

      Approx. 200 kg

      General Parameters

      Display Screen

      5.7” TFT touch screen

      Working Power

      AC 110 V/220 V±10%, 50 Hz /60 Hz (220 V in mainland China

      Fuse

      6 A

      Max. Power

      500 W

      Communication Mode

      Ethernet LANRJ45

      External Control Mode

      25-pin parallel port cable

      External Trigger Input

      BNC, 5 V TTL, the node is open, oscilloscope can trigger the product when internal circuit is closed.

      Running Control Input

      BNC, 5 V TTL

      Failure Detection

      The failure information will be displayed on LCD in front panel when failure occurs and interrupt the working of instrument.

      Working Status Indication

      LED indication and LCD display on front panel

      Earthing Mode

      Flat earth line

      Monitor Output Mode

      Standard 1 m coaxial cable

      Ambient Temperature

      15 ~ 35

      Relative Humidity

      45% ~ 75%

      Atmospheric Pressure

      86 kPa ~ 106 kPa

      Accessories

      User Manual, Test line, Ground line, 3-core power line, fuses (spare parts), Coaxial cable

      Options

      Ten-way distribution networks

      SPN 10

      Coupling/decoupling networks

      CPN 4516S (customized for other load capacity)

      Isolation transformer

      DG-4.4 KVA

      Wide-band Current Monitor

      CM 0220M

      Measurement

      MAS 3000

      Control Software

      Corelab


      Tel: +86 (0)512 6807 7192

      Video