More
The Power frequency magnetic field coil TCXS223 is specially designed according to the characteristics and requirement of magnetic field immunity tests conducted on electrical and electronic products.
The Impulse Voltage Simulator VSG 335 series are designed on the basis of 3rd-generation control platform and capable of generating 1.2/50 μs impulse according to specific customer requirement.
The ISS 1800 induced susceptibility testing system is capable of generating alternating signals with frequency ranging from 350 Hz to 32 kHz, its voltage reaches up to 1800 V and maximum current is 40 A.
The EMID 1M is used to decouple the interference signals in the EFT/Bursts immunity test as per IEC 61000-4-4 and GB/T 17626.4.
The CDN 405AF8-C is designed to conduct surge test on unshielded unsymmetrical interconnection lines as per figure 9 specified in IEC/EN 61000-4-5:2017.
The TYXH 06200 Helmholtz coils is designed to generating DC and alternating magnetic field (together with suitable signal source and compensation network) as per ISO 11452-8.
The HVSE 200 is applied to the common mode/differential mode testing switching of Waveform A and Waveform C specified in ISO 7637-4. Through plugging in corresponsive port, HVSE 200 can save users from complicated wiring.
The 7637-4R500/120 is designed to meet the requirement of matched impedance and circuit capacitor of Waveform A, waveform B and waveform C specified in ISO 7637-4. The resistor or capacitor can be used independently or combined in parallel.
The CM 0220M is used for measuring alternating current and time domain pulse current in the frequency range from 10 Hz to 20 MHz.
The SEPN 100100T10 three-phase automatic coupling/decoupling network for EFT/Burst and surge immunity tests is designed according to test requirements of IEC/EN 61000-4-4 and IEC/EN 61000-4-5
Youtube
Facebook
Twitter
