Home|product
Chinese
search
x
    Product Menu

    PRODUCTS

    EMC General Test Equipments
    + Multifunctional Immunity Simulator
    + ESD Simulators
    + EFT/Burst Simulators
    + Surge Simulator
    + CDN for Power Line in Transient Immunity Test
    + CDN for Communication Cable in Transient Immunity Test
    + Radio-Frequency Conducted Simulator
    + CDN for RF Conducted Immunity Test
    + EM Clamp
    + Power Frequency Magnetic Field Simulator
    + AC/DC Magnetic Field Simulator
    + Pulse Magnetic Field Simulators
    + Damped Oscillatory Magnetic Field Simulator
    + Power Fail Simulator
    + DC Power Fail Simulator
    + Ring Wave Simulators
    + Fast/Slow Damped Oscillatory Wave Simulator
    + Low Frequency Conducted Immunity Simulator
    + Software
    Automotive EMC Test Equipments
    + Automotive ESD Simulator
    + Transient Immunity Simulator
    + Automotive Load Dump Simulator
    + Automotive Voltage Variation Simulator
    + Vehicle-mounted Arbitrary Waveform Simulator
    + ISO 7637-4
    + Automotive Transient Disturbance Simulator
    + Automotive BCI Test System
    + Low Frequency Magnetic Field Immunity Test System
    + Automobile Transient Pulse Simulator
    + High Voltage Noise Simulator
    + Vehicle Power Supply Circuit Surge Simulator
    + Vehicle Multimedia Voltage Disturbance Simulator
    + Ripple Signal Generator
    + Voltage Ripple Disturbance Simulator
    + Electro-mobile Vehicles Pulse Disturbance Generato
    + Automotive Spark Simulator
    + Electric Vehicle High Voltage Performance Test System
    + Artificial Network
    + Balanced / Unbalanced Transformers
    + Capacitance Coupling Clamp
    + Stripline
    + TEM Cell
    + Automotive Immunity Test Software
    + Calibration Accessories
    + Low-k Dielectric Material for Laboratory Test
    Military Test Equipment
    + Electrostatic Sensitivity for Electric Initiating
    + 300KV ESD Testing System
    + MIL-STD-461 Series/ GJB 151、181 Series
    + Spike Surge Voltage Simulator
    + Line Impedance Stabilization Network
    + HJB 34A
    Lightning Effect Test Equipments
    + High Voltage Attachment Points Partition Test System
    + Lightning Direct Effect Test System
    + Lightning Indirect Effect Test System for Airborn Equipment
    + Voltage Spike Test System
    + Induced Signal Susceptibility Test System
    System Integration
    + General EMI Test System
    + General EMS Test System
    + Automotive EMI Test System
    + Automotive EMS Test System
    + Military EMI Test System
    + Military EMS Test System
    + Anechoic Chamber
    High Voltage Test Equipments
    + Impulse Current Test System
    + Small impact current
    + Surge Simulator
    + Coupling /Decoupling Network
    + Decoupling Network
    + Action Load Network Power
    + SPD Testers
    + Customization for HV Test Equipment
    + Impulse Voltage Test System
    + Measurement/Control Software
    + Accessories
    Product Compliance Test Equipment
    + Product Compliance Tester for Communication Power
    + Power Induction/Contact Simulator
    + High Power Short Time Overcurrent Simulator
    + Pulse Voltage Withstand Tester
    + High Voltage Pulse Simulator
    Customization for Non-EMC Equipment
    + Switching Device for Capacitor Endurance Test
    Agency Equipment
    + EMI Receiver
    + Power Amplifier
    + RF Accessories
    + Current Injection Probe
    ANSI Standards
    CISPR Standards
    EN Standards
    GB/T Standards
    GJB Standards
    IEC Standards
    ISO Standards
    ITU-TK Standards
    Other standards
    QC Standards
    SJT Standards
    TY-T Standards
    UL Standards
    YD-T Standards
      Multi Group Pulse Test System ETS 160W3
      Model:ETS 160W3

      Profile

      ETS 160W3 is a testing system designed according to the standards DO-160G S22 and MIL-STD-461G, which can meet the testing requirements of waveform 3 (1 MHz and 10 MHz)
      PDFConsultation

      Online customized according to your needs>>

        Share
      • Feature
      • Standard
      • Parameter
      • Fitting
      • Services
      • Video
      When flying in severe convective weather, airplanes are often affected by lightning strikes, which generate transient induced voltage or current on the circuits or cables of onboard equipment, known as indirect lightning effects. This phenomenon may cause the aircraft to lose control and even lead to serious accidents such as a fire on the aircraft fuselage. For safety reasons, onboard equipment must undergo lightning protection design and testing verification to ensure that critical systems and equipment on board can still function properly after exposure to lightning environments, without affecting the continuous safe flight of the aircraft.
      ETS 160W3 is a testing system designed according to the standards DO-160G S22 and MIL-STD-461G, which can meet the testing requirements of waveform 3 (1 MHz and 10 MHz), and can perform cable bundle testing of level 5 as required by the standard. In addition, it meets the voltage requirements of level 5 under load.

      Features:
      > 5.7-inch color touch screen control, simple and intuitive interface operation
      > Can be remotely controlled with CoreLab software
      > Supports cable bundle test level 5 requirements, with an output voltage of up to 5 kV
      > Meet W3 voltage waveforms of 1 MHz and 10 MHz.
      > Can be used in various complex testing environments (such as on-site testing). The coupler with a 3-meter-long load meets the requirements of Test Level 5 (maximum output voltage up to 4 kV)

      • DO-160G S22:2010
      • MIL-STD-461G:2015

      Technical Parameters

      Voltage Wave W3 1MHz

      Coupling Mode

      Cable Induction CI

      Repetition Frequency

      1 MHz ± 20%

      The fifth Waveform Decays to

      Between 25% and 75% of the first wave

      Single Shot Back Test Level

      2000 V ~ 5500 V(-0% ~ +20%)

      Multiple Counterattack Test Levels

      2000 V~5500 V(first wave, -0%~+20%)

      1000 V~2750 V (subsequent wave, -0%~+50%)

      Polarity

      Positive,Negative

      Number of Subsequent Waves in MS Mode

      1~14 can be set

      Subsequent Wave Time Interval in MS Mode

      10 ms ~ 200 ms adjustable, with options for uniform and random modes

      Test Frequency

      1 ~ 9999

      Test Repetition Time

      1.5 s ~ 300 s

      Voltage Wave W3 10MHz

      Coupling Mode

      Cable Induction CI

      Repetition Frequency

      10 MHz ± 20%

      The fifth Waveform Decays  to

      Between 25% and 75% of the first wave

      Single Shot Back Test Level

      2000 V ~ 4800 V(-0% ~ +20%)

      Multiple Counterattack Test Levels

      2000 V~ 4800 V(first wave, -0%~+20%)

      1000 V~ 2400 V (subsequent wave, -0%~+50%)

      Polarity

      Positive,Negative

      Number of Subsequent Waves in MS Mode

      1~14 can be set

      Subsequent Wave Time Interval in MS Mode

      10 ms ~ 200 ms adjustable, with options for uniform and random modes

      Test Frequency

      1 ~ 9999

      Test Repetition Time

      1.5 s ~ 300 s

      ETS 160W3 Multi Group Pulse Test System

      Display Screen

      5.7-inch TFT touch screen

      Working Power

      AC 220 V ± 10%50/60 Hz

      Fuses

      6A

      Maximum Power Consumption

      200 W

      Memory Space

      Infinite (PC)

      Communication Methods

      Ethernet LAN, RJ45

      Working Status Indication

      Front panel LED indication, LCD display

      Grounding Connection Method

      Use a flat grounding wire

      Dimension

      Host 19 inches/6U 450 mm (W) * 280 mm (H) * 610 mm (D)

      Weight

      Approx 22 kg 

      Ambient Temperature

      15 ~ 35

      Relative Humidity

      45% ~ 75% ,RH(no condensation)

      Atmospheric Pressure

      86 kPa ~ 106 kPa

      LVT-2C  Voltage Coupling Transformer

      Rated Voltage

      5500 V

      Rated Current

      320 A

      Dimension

      260 mm (W) * 250 mm (H) * 470 mm (D)

      Inner width:84 mm

      Inner height:70 mm

      Weight

      Approx 35 kg

      Standard Accessories

      Power cord, Testing Wire,Voltage Coupling Transformer LVT-2C, Flat Grounding Wire, Fuse, RF Cable, User Manual ,Calibration Report, Product Warranty

      Optional Accessories

      1

      Immunity Testing Software

      Model: CoreLab
      Compatible with Windows 7/8/10/11 operating systems.
      Supports Ethernet interface and serial communication mode.
      Support parameter scheduling testing, testing sequences, one click testing, easy operation.
      Customer information can be set,test reports can be automatically generated, and export of test reports is supported, making it convenient for users to record real-time data.

      全国免费服务热线

      4006-0512-77

      Video