Load dump simulator LDS 200 simulates a sudden battery disconnection from the alternator,which cause the lost of the battery load the alternator generates an over voltage impulse. Such load dump pulses are high energy pulses with a high potential of destruction. The LDS200 generates the load dump pulses as per ISO 7637, ISO 16750-2, SAEJ 1113, SAEJ 1455, JASO and many more manufacturer specification, e.g. Ford, Chrysler, Renault, PSA, and NISSAN etc.
By means of a built-in clipping circuit the LDS200 also create clipped load dump pulses as per international standards as well as manufacturer requirements.
> 5.7 inch color touch screen
> Generates clipped load dump pulse
> internal adjustable source impedance
> Pulse duration up to 1200ms (internal resistance more than 2 Ω)
> Comply with most international standards and car manufacturer standards
> Built-in 60V/30A coupler
> With the function of current detection and over current protection
> Ethernet, RJ 45, PC control, and test report documentation and print
|
Technical parameters |
|
|
ISO16750-2 TEST A/B & ISO7637-2 P5a/P5b |
|
|
Pulse amplitude |
30-210V，0.1V steps |
|
Clamp voltage |
15-200V，0.1V steps |
|
Impedance(Ri) |
0.5-8Ω，0.5Ω adjustable |
|
Rise time |
5-10ms |
|
Duration |
40-400ms，1ms adjustable |
|
Repetition time |
15-600s，0.1s depending on pulse energy |
|
DUT voltage monitoring |
10：1 |
|
DUT current monitoring |
10A:1V |
|
Pulse output mode |
Single, continuous, 1-9999 program control |
|
Output |
Can be connected with TIS700 |
|
Coupling |
Couple with positive pole |
|
Decoupling |
Built-in diode |
|
DUT supply |
Max. 60V/30A |
|
CRO |
Trigger OSC 5V TTL signal |
|
External trigger |
Close trigger, BNC connector |
|
Serial port |
LAN Ethernet RJ45 |
|
Supply voltage |
AC 110/220V, 士10%,45-65Hz |
|
Temperature |
15-+35℃ |
|
Dimension |
450 x600 x266mm(6U cabinet) |
|
Weight |
Approx. 30Kg |
|
Basic accessories |
|
Simulator, user manual, test report, test cable, power cord, fuse |
|
Software |
|
AUTO Lab With PC installed WIN XP and WIN7, it can be easily operated to make the measurement, based on the customized test program. It can identify any device for AUTO Lab test with automatic configuration. It can easily generate test reports. |
