The human body can sometimes generate voltages of up to several thousand volts from static electricity on objects or between two objects, which can cause electrical and electronic equipment circuits to malfunction or even damage. EDS 30T is a state-of-the-art intelligent electrostatic discharge generator with an output voltage of 30 kV. It is also China's first independently developed and produced electrostatic discharge simulator that integrates discharge gun head and touch screen control. It accurately simulates electrostatic discharge pulse interference in accordance with IEC 61000-4-2:2008 and other requirements, designed according to ergonomics. The LCD touch screen is simple and easy to operate, with AC and battery pack options for power supply, replaceable RC module, and built-in temperature and humidity meter, ensuring reliability in various testing scenarios.
Features:
> Ergonomic design;
> LCD touch screen;
> All-in-one design (no base unit);
> Changeable R/C networks;
> Automatic polarity switching;
> Battery or mains operation, long battery life;
> Temperature and humidity monitoring;
> Built-in standard test library;
> Intelligent detection the failure of air discharge.
|
Technical Parameters |
|
|
Contact Discharge |
200 V ~ 30,000 V （±5%） |
|
Air Discharge |
200 V ~ 30,000 V （±5%） |
|
Voltage Step |
100 V |
|
Hold Time |
＞ 5 s |
|
Charge Resister |
51 MΩ |
|
Polarity |
Positive, negative |
|
RC Module Recognition |
Automatic recognition &LCD display |
|
Temperature And Humidity |
Built-in temperature and humidity meter with functions of record and protection |
|
Repetition Frequency |
Single /0.1/0.2/0.5/1/2/5/10/20 Hz |
|
Trigger Mode |
Manual/automatic |
|
Pulse Counter |
1 ~ 9999 |
|
Contact Discharge |
150pF/330 ohm |
|
Rise Time |
0.8 ns +/- 25% |
|
Quick Start Test Program |
Simple and easy to reset data online |
|
Evaluate Procedure |
Contact discharge test at 20 Hz，evaluate the test points of DUT |
|
Standard Test Procedure |
accord with IEC 61000-4-2:2008 |
|
|
|
|
General Parameters |
|
|
Weight |
Approx. 12.0 kg |
|
Weight (EDS Gun) |
Approx. 2.0 kg |
|
Temperature |
15℃ ~ 35℃(operation conditio) |
|
Humidity |
30% ~ 60%(operation condition) |
|
Air Pressure |
86 kPa ~ 106 kPa |
|
Working Power Supply |
100 V ~ 240 V（±10%）; 50/60 Hz（default AC 220 V 50 Hz for China Mainland） |
|
Standard Accessories |
||
|
1. Discharge Gun
|
Discharge gun and control 1 PCS |
|
|
2. High Voltage Generator
|
Programmable high voltage source 1 PCS |
|
|
3. Standard RC Modules EDS 20H-RC
|
150 pF / 330 ohm（default）, removable |
|
|
4. Discharge Tip EDS 30T-CONT(330Ω)
|
Contact discharge gun head |
|
|
5. Discharge Tip EDS 20H-AIR
|
Air discharge gun head |
|
|
6. Grounding wire |
2 m |
|
|
7. Package |
Carrying case |
|
|
8. Documents |
Factory inspection report and user manual |
|
|
Optional Accessories |
||
|
1. RC Modules
|
150 pF/2000 ohm (EDS) 330 pF/2000 ohm (EDS) 330 pF/330 ohm (EDS) 100 pF/1500 ohm (EDS) 150 pF/150 ohm (EDS) 500 pF/500 ohm (EDS) |
500 pF/5000 ohm (EDS) 200 pF/0 ohm (EDS) 500 pF/0 ohm (EDS) 500 pF/100 ohm (EDS) Customization is available for RC module. |
|
2. 30 mm Air Discharge Tip EDS 30T-AIR (30mm)
|
For 15 kV to 30 kV test |
|
|
3. Battery Box EDS01
|
8*2600 mAh Ni-MH rechargeable batteries to replace AC source For contact discharge +30 kV, 1 Hz，approx. 8 h Dimension: 140 mm*100 mm*35 mm, weight 0.5 kg |
|
|
4. Battery Charger
|
Used for charging for battery box EDS 01 |
|
|
5. Electrostatic Discharge Desk
|
Grounded HV resistor 2 x 470 kohm |
|
|
Vertical coupling plane 500x500x3 mm |
||
|
Horizontal coupling plane 1600x800x2 mm |
||
|
Reference ground plane 2700x1800x2 mm |
||
|
Test table 1600x800x800 mm, solid wood，meet IEC 61000-4-2 requirements |
||
|
EDS CALA
|
Used for waveform calibration as per IEC/EN61000-4-2, including 2 ohm target /4 GHz，attenuator，coaxial cable，user manual |
|
|
7. Attenuator JZ602
|
Impedance: 50 ohm; Attenuation: 20 dB |
|
|
8. Attenuator JZ603
|
Impedance: 50 ohm; Attenuation: 30 dB |
|
