Home|product
Chinese
search
x
    Product Menu

    PRODUCTS

    EMC General Test Equipments
    + Multifunctional Immunity Simulator
    + ESD Simulators
    + EFT/Burst Simulators
    + Surge Simulator
    + CDN for Power Line in Transient Immunity Test
    + CDN for Communication Cable in Transient Immunity Test
    + Radio-Frequency Conducted Simulator
    + CDN for RF Conducted Immunity Test
    + EM Clamp
    + Power Frequency Magnetic Field Simulator
    + AC/DC Magnetic Field Simulator
    + Pulse Magnetic Field Simulators
    + Damped Oscillatory Magnetic Field Simulator
    + Power Fail Simulator
    + DC Power Fail Simulator
    + Ring Wave Simulators
    + Fast/Slow Damped Oscillatory Wave Simulator
    + Common-Mode Conducted Immunity Simulator
    + Software
    Automotive EMC Test Equipments
    + Automotive ESD Simulator
    + Transient Immunity Simulator
    + Automotive Load Dump Simulator
    + Automotive Voltage Variation Simulator
    + Vehicle-mounted Arbitrary Waveform Simulator
    + ISO 7637-4
    + Automotive Transient Disturbance Simulator
    + Automotive BCI Test System
    + Low Frequency Magnetic Field Immunity Test System
    + Automobile Transient Pulse Simulator
    + High Voltage Noise Simulator
    + Vehicle Power Supply Circuit Surge Simulator
    + Vehicle Multimedia Voltage Disturbance Simulator
    + Ripple Signal Generator
    + Voltage Ripple Disturbance Simulator
    + Electro-mobile Vehicles Pulse Disturbance Generato
    + Automotive Spark Simulator
    + Electric Vehicle High Voltage Performance Test System
    + Artificial Network
    + Balanced / Unbalanced Transformers
    + Capacitance Coupling Clamp
    + Stripline
    + TEM Cell
    + Automotive Immunity Test Software
    + Calibration Accessories
    + Low-k Dielectric Material for Laboratory Test
    Military Test Equipment
    + Electrostatic Sensitivity for Electric Initiating
    + 300KV ESD Testing System
    + MIL-STD-461 Series/ GJB 151、181 Series
    + Spike Surge Voltage Simulator
    + Line Impedance Stabilization Network
    Lightning Effect Test Equipments
    + High Voltage Attachment Points Partition Test System
    + Lightning Direct Effect Test System
    + Lightning Indirect Effect Test System for Airborn Equipment
    + Voltage Spike Test System
    + Induced Signal Susceptibility Test System
    System Integration
    + General EMI Test System
    + General EMS Test System
    + Automotive EMI Test System
    + Automotive EMS Test System
    + Military EMI Test System
    + Military EMS Test System
    + Anechoic Chamber
    High Voltage Test Equipments
    + Impulse Current Test System
    + Impulse Current Generator
    + Surge Simulator
    + Coupling /Decoupling Network
    + Decoupling Network
    + Action Load Network Power
    + SPD Testers
    + Customization for HV Test Equipment
    + Impulse Voltage Test System
    + Measurement/Control Software
    + Accessories
    Product Compliance Test Equipment
    + Product Compliance Tester for Communication Power
    + Power Induction/Contact Simulator
    + High Power Short Time Overcurrent Simulator
    + Pulse Voltage Withstand Tester
    + High Voltage Pulse Simulator
    Customization for Non-EMC Equipment
    + Switching Device for Capacitor Endurance Test
    Agency Equipment
    + EMI Receiver
    + Power Amplifier
    + RF Accessories
    + Current Injection Probe
    ANSI Standards
    CISPR Standards
    EN Standards
    GB/T Standards
    GJB Standards
    IEC Standards
    ISO Standards
    ITU-TK Standards
    Other standards
    QC Standards
    SJT Standards
    TY-T Standards
    UL Standards
    YD-T Standards
    HOME>Products>EMC General Test Equipments>Surge Simulator >Combination Wave Lightening Surge Simulator
      Combination Wave Lightening Surge Simulator
      Model:CWS 1500C & CWS 1500/V,CWS 2000C & CWS 2000/V

      Profile

      The combination wave lightning and surge simulator CWS 1500 series and CWS 2000 series are developed and designed according to IEC 61000-4-5 and GB/T 17626.5
      PDFConsultation

      Online customized according to your needs>>

        Share
      • Feature
      • Standard
      • Parameter
      • Fitting
      • Services
      • Video


      The combination wave lightning and surge simulator CWS 1500 series and CWS 2000 series are developed and designed according to IEC 61000-4-5 and GB/T 17626.5, which can simulate the unipolar surge interference phenomenon caused by switching and lightning transients overvoltage and output 1.2/ 50 μs & 8/20 μs combination wave and 1.2/ 50 μs voltage wave, the max. pulse voltage up to 20 kV, and max. current up to 10 kA.
      This simulator can be equipped with SPN series coupling and decoupling network to inject lightning surge signal into the power line port of the tested equipment, and prevent the surge impact from affecting the circuits of other untested devices, equipment or systems.
      The product is designed based on the third-generation platform, which is compact and easy to move. The interface is intuitive and the operation is simple.


      Features:
      > 5.7 inches color touch screen on front panel;
      > 1.2/ 50 μs & 8/20 μs combination wave and 1.2/ 50 μs voltage wave;
      > Automatic judgment of various faults, sound and light alarm;
      > Max. surge output voltage 20 kV, max. surge current  10 kA;
      > LAN communication interface for remote control;
      > Optional fully automatic coupling/decoupling network;
      > Built-in current and voltage dual peak acquisition, touch screen interface display output;


      • IEC 61000-4-5
      • GB/T 17626.5
      • GB/T 16927.1
      • ITU K.21
      • ITU K.44

      Control Module--CWS 1500C/ CWS 2000C

      Display screen

      5.7-inch TFT touch screen

      Operating power supply

      AC 110 V / 220 V (±10%)

      50/60 Hz(Default AC 220 V in Mainland China)

      Fuse

      6 A

      Max. Power dissipation

      50 W

      Communication mode

      Ethernet LAN

      External control mode

      25-pin parallel cable

      Interval time

      5 s-99 s(The shortest time depends on the test waveform, test voltage)

      Number of tests

      1~ 999

      Failure detection

      Front panel LCD display when failure occurs, and interrupt instrument working

      Instrument working status indicator

      LED on the front panel indicates and LCD displays

      Instrument grounding connection

      Use flat ground cables

      1.2/50 μs Combination Wave Module --CWS 1500/CWS 2000

      Open-circuit voltage

      Voltage peak

      CWS 1500: 500 V ~ 15 kV (±10%)

      CWS 2000:1000 V ~ 20 kV (±10%)

      Rise time

      1.2 μs (±30%)

      Duration

      50 μs (±20%)

      Short-circuit current

      Current peak

      CWS 1500: 250 A ~7.5 kA (±10%)

      CWS 2000: 500 A ~10 kA (±10%)

      Rise time

      8 μs (±20%)

      Duration

      20 μs(±20%)

      Source output impedance

      2 Ω±0.25 Ω

      Polarity

      Positive/negative/alternating

      Synchronization

      0° ~ 360° (45 Hz ~ 65 Hz)

      Trigger mode

      Automatic, manual, external

      Voltage peak detection

      Front panel BNC output 2000V:1V; Real-time display of measured values

      Current peak detection

      Front panel BNC output 500A:1 V; Real-time display of measured values

      Synchronization

      0° ~ 360°(45 Hz ~ 65 Hz)

      Trigger mode

      Automatic, manual, external

      1.2/50 μs Combination wave and voltage wave module --CWS 1500V/CWS 2000V

      (optional)

      1.2/50 μs combination wave

      See the list at the bottom left of this page

      1.2/50 μs voltage wave

      Voltage peak

      CWS 1500: 500 V ~ 15 kV (±10%)

      CWS 2000:1000 V ~ 20 kV (±10%)

      Rise time

      1.2 μs (±30%)

      Duration

      50 μs(±20%)

      Source output impedance

      500 Ω

      Polarity

      Positive/negative/alternating

      Repetition (single pulse time)

      5 s ~ 99 s (The shortest time depends on the test voltage)

      Voltage peak detection

      Front panel BNC output 2000 V:1 V; Real-time display of measured values

      Trigger mode

      Automatic, manual, external

      General parameters

      Temperature range

      15 -35

      Humidity range

      45%-75%

      Pressure range

      86 kPa-106 kPa

      Grounded resistance

      ≤0.5 Ω

      Dimension

      CWS 1500C/CWS 2000C: 4U

      CWS 1500/ CWS 2000: 8U

      CWS 1500V/ CWS 2000V: 8U

      Weight

      CWS 1500C/ CWS 2000C:18 kg

      CWS 1500/ CWS 2000: 54 kg

      CWS 1500V/ CWS 2000V: 54 kg

      Accessories

      Three-core power cord, User manual, Test line, Earth line, Fuse, Coaxial cable

      Options

      Oscilloscope

      MDO 3012

      18μF capacitance

      CCU 2000

      Broadband Current Monitoring Clamp

      CM 0220M

      Voltage probe

      Tektronix P 6015A

      Controlling software

      Corelab for remote control

      Coupling/Decoupling Network

      SPN Series

      Tel: +86 (0)512 6807 7192

      Video