The static electricity between human body and an object or between two objects sometimes can be up to tens of thousands of volts, which may cause electrical and electronic equipments circuit malfunction or even damage. EDS 30V is a most advanced intelligent electrostatic discharge generator, the output voltage 30kV, it is also China’s first independent research and development product by integrating discharge tip and touch screen control in an electrostatic discharge simulator as per ISO 10605 and GB/T 19951 standards. LCD touch screen is simple and easy to operate, RC module can be replaced, the built-in thermo-hygrometer, remote control software, to ensure the reliability of all kinds of tests.
Features:
> Ergonomic design
> LCD touch screen control
> Temperature and humidity record and protection
> Automatic polarity switching
> Discharge modules can be replaced, automatic identification
> Built-in standard test library
> Intelligent detection of the failure of air discharge
|
Technical parameters |
|
|
Contact discharge |
200 V – 30,000 V, +/-5% |
|
Air discharge |
200 V – 30,000 V, +/-5% |
|
Voltage step |
100 V |
|
Holding time |
> 5 s |
|
Polarity |
+/- |
|
RC module recognition |
Automatic recognition and LCD display |
|
Temperature and humidity |
Built-in thermo-hygrometer with record and protection function |
|
Pulse repetition rate |
single/0.1/0.2/0.5/1/2/5/10/20 Hz |
|
Trigger mode |
manual& auto |
|
Pulse counter |
1-9999 |
|
Discharge module |
330 pF / 2000 Ω 150 pF / 2000 Ω 330 pF / 330 Ω 150 pF / 330 Ω |
|
Rising time |
0.7-1.0 ns |
|
Evaluate procedure |
Contact discharge test at 20 Hz，evaluate the test points of DUT |
|
General parameters |
|
|
Total Weight |
Approx.12.0 kg |
|
Weight (EDS gun) |
Approx.2.0 kg |
|
Environment temperature |
15 ℃ - 35 ℃（operating conditions） |
|
Relative humidity |
30%-60%（operating conditions） |
|
Air pressure |
86 kPa-106 kPa |
|
Working power supply |
100 V - 240 V +/-10%, 50/60 Hz |
|
Standard equipped |
|
|
1.Discharge gun
|
Discharge gun and control (1 pc) |
|
2.High voltage generator
|
High voltage power supply with programmable control (1 pc) |
|
3.Standard RC module
|
330 pF / 2000 Ω; 150 pF / 2000 Ω; 330 pF / 330 Ω; 150 pF / 330 Ω; RC module is detachable |
|
4.Discharge tip
|
Contact discharge tip |
|
5.Discharge tip
|
Air discharge tip |
|
6.Grounding wire |
2 m |
|
7.Package |
Suitcase |
|
8.Documents |
Factory calibration report and user manual |
|
Options |
|
|
1.RC Module
|
100 pF/1500 ohm (EDS) 150 pF/150 ohm (EDS) 500 pF/500 ohm (EDS) 500 pF/5000 ohm (EDS) 200 pF/0 ohm (EDS) 500 pF/0 ohm (EDS) 500 pF/100 ohm (EDS) Support other RC modules customization |
|
2.30 mm Air Discharge Tip EDS 30T-AIR (30mm)
|
For 15 kV to 30 kV test |
|
3. Battery box EDS01
|
8*2600 mAh, Ni-MH charging battery, around 8h for contact discharge with +30 kV, 1 Hz, Dimension 140 mm x100 mm x35 mm. weight 0.5 kg |
|
4.Battery charger
|
Charging for battery box EDS01 |
|
5.Electrostatic Discharge Test Setup
|
Grounding high voltage resistor: 2x470 kohm |
|
Vertical coupling plane: 500 x 500 mm |
|
|
Horizontal coupling plane: 1600 x 800 mm |
|
|
Grounding reference plane: 2700 x 1800 mm |
|
|
Test table: 1600 x800 x 800 mm, fully wooden, as per IEC 61000-4-2 |
|
|
6. ESD calibration set ESD-CALA
|
Used for calibration waveforms as per ISO 10605, including 2 ohm target/4 GHz, attenuator, coaxial cable and user manual |
|
7. Attenuator JZ602
|
Impedance: 50 Ω Attenuation: 20 dB |
|
8. Attenuator JZ603
|
Impedance: 50 Ω Attenuation: 30 dB |
