General description
Load dump pulses generator simulate a sudden battery disconnection from the alternator, which cause the lost of the battery load the alternator generates an over voltage impulse. Such load dump pulses are high energy pulses with a high potential of destruction. The LDS200 generates the load dump pulses as per ISO 7637, ISO 16750-2, SAEJ 1113, SAEJ 1455, JASO and many more manufacturer specification, e.g. Ford, Chrysler, Renault, PSA, and NISSAN etc. By means of a built-in clipping circuit the LDS200 also create clipped load dump pulses as per international standards as well as manufacturer requirements.
Features
5.7 inch color touch screen
Generates clipped load dump pulse
Pulse duration up to 1200ms (internal resistance more than 2 Ω)
Comply with most international standards and car manufacturer standards
Built-in 60V/30Acoupler
With the function of current detection and over current protection
Emergency stop
Ethernet, RJ 45, PC control, and test report documentation and print
|
Technical Data |
|
|
ISO 16750-2 TEST A/B ,as per ISO 7637-2 P5a/P5b |
|
|
voltage |
30-210V, 0.1V steps |
|
Clamp voltage |
15-100V, 0.1Vsteps |
|
Resistor |
0.5- 8 ohm, 0.5 ohm adjustable |
|
Rise time |
5- 10ms |
|
Pulse duration |
40-400ms, 1ms adjustable |
|
repetition time |
15-600s, (0.1s) depending on pulse energy |
|
DUT voltage monitoring |
10:1 |
|
DUT current monitoring |
10A: 1V |
|
Pulse output mode |
Single, continuous, 1-9999 program control |
|
output |
Can be connected with TIS700 |
|
Coupling |
Couple with positive pole |
|
Decoupling |
Built-in diode |
|
DUT power supply |
Max 60V/30A |
|
CRO |
Trigger OSC 5V TTL signal |
|
Outside trigger |
Close trigger, BNC connector |
|
Serial interface |
LAN Ethernet RJ45 |
|
Power supply |
AC 110/220V,±10%, 45-65Hz |
|
Temperature |
15℃ -35℃ |
|
size |
450×600×266mm(6U cabinet) |
|
Weight |
Around20kg |
|
Technical Data |
|
|
Software(optional) |
|
|
Software AUTO Lab for software With PC installed WIN XP and WIN7, it can be easily operated to make the measurement, based on the customized test program. It can identify any device for AUTO Lab test with automatic configuration. It can easily generate test reports. |
|
|
Basic equipment |
|
simulator, user manual, test report, cable, fuse |
