Ergonomic design
LCD touch screen
All-in-one design (no base unit)
Changeable R/C networks
Automatic polarity switching
Battery or mains operation, long battery life
Temperature and humidity monitoring
As per:
IEC/EN 61000-6-1
IEC/EN 61000-6-2
IEC/EN 61000-4-2
IEC/EN 61340-3-1
IEC/EN 61326
ISO 10605
ISO 14304
ITU-T K.20
Bellcore GR-1089-Core
GB/T 17626.2
|
Technical Data |
|
|
Contact discharge |
1,000V-30,000V +/-5% |
|
Air discharge |
1,000V-30,000V +/-5% |
|
Voltage step |
100V |
|
Hold time |
＞5s |
|
Polarity |
Positive, negative, alternative |
|
RC module |
LCD display |
|
Humidity &Temperature |
Internal hygrothermograph, record and protect |
|
Trigger |
|
|
Repetition frequency |
Single/0.1/0.2/0.5/1/2/5/10/20 Hz |
|
Trigger mode |
Manual/automatic |
|
Pulse |
1-9999 |
|
Remote control |
via fiber optical connector by PC |
|
Output |
|
|
Contact discharge |
as per IEC/EN 61000-4-2 |
|
150pF/330Ω |
|
|
Rise time |
0.8ns ±25% |
|
First peak current |
7.5A ±15% @2kV |
|
15.0A ±15% @4kV |
|
|
22.5A ±15% @6kV |
|
|
30.0A ±15% @8kV |
|
|
Current value at 30ns |
4.0A ±30% @2kV |
|
8.0A ±30% @4kV |
|
|
12.0A ±30% @6kV |
|
|
16.0A ±30% @8kV |
|
|
Current value at 60ns |
2.0A ±30% @2kV |
|
4.0A ±30% @4kV |
|
|
6.0A ±30% @6kV |
|
|
8.0A ±30% @8kV |
|
|
Test program |
|
|
Summary procedure |
Test according to different standards |
|
Quick start |
Simple and easy to reset data on line |
|
Evaluation procedure |
Contact discharge test at 20Hz |
|
Evaluate the test points of DUT |
|
|
Standards |
Comply with EN/IEC 61000-4-2and EN 61000-6-1/-6-2 |
|
Setup |
Parameters and standards level |
|
General Data |
|
|
Weight |
6000 gram (battery included) |
|
Material |
ABS plastic |
|
Temperature |
5℃ -40℃ |
|
Humidity |
20 – 80% |
|
Mains |
100V-240V +/-10%, 50/60Hz |
|
Basic equipment |
|
|
Discharge gun |
a discharge gun |
|
HV generator |
a HV generator |
|
R/C module |
150pF/330 ohm discharging module, renewable |
|
Discharging pole |
Air discharging tip, contact discharging tip |
|
Grounding line |
2m |
|
Package |
suitcase |
|
Documents |
Manual and test report |
|
Accessories |
|
|
DM1-RFC1 |
150pF/330 ohm |
|
Fast relay discharge module |
|
|
Rise time 200ps-300ps |
|
|
DM2 |
150pF/2,000 ohm(ISO 10605) |
|
DM3 |
330pF/2,000 ohm, discharge module |
|
DM4 |
100pF/1,500 ohm, discharge module |
|
DM5 |
330pF/2,000 ohm(ISO 10605) |
|
DM6 |
330pF/330 ohm(ISO 10605) |
|
DM7 |
100pF/1,500 ohm |
|
DM8 |
150pF/150 ohm |
|
DM9 |
500pF/500 ohm |
|
DM10 |
500pF/5000 ohm |
|
DMX |
Customized discharge module |
|
Esd.control |
Software for remote-control and report generation |
|
Fiber optic interface |
|
|
Grounding HV resistance |
2×470 kohm |
|
Vertical coupling plane |
50×50cm |
|
Horizontal coupling plane |
1600×80cm |
|
Reference ground |
2700×1800cm |
|
Test table |
1.6×0.8m, solid wood |
|
Comply with IEC 61000-4-2 |
|
|
Fiber optic interface |
USB |
|
The cable of3mor6m |
|
|
Max. baud rate: 19,200 |
|
|
ESD Calibration set |
To calibrate the waveform of IEC/EN61000-4-2, including 2 ohm target, 4GHz attenuator, coaxial cable and use manual. |
|
General Data |
|
|
Weight |
2200 gram (battery included) |
|
Material |
ABS plastic |
|
Temperature |
5℃ -40℃ |
|
Humidity |
20 – 80% |
|
Mains |
100V-240V +/-10%, 50/60Hz |
