PRODUCTS

Norme de base
Norme standard
Norme du produit
Norme de communcation
Norme UL
Norme de fabricant des automobiles
Norme des automobiles
Norme ANSI/IEEE
HOME>Products
Simulateur de panne d’alimentation APG
Type:APG

Instruction des produits

La série APG permet de fournir l'alimentation de tension simulée et CC à la batterie. Lors du test dans le laboratoire, cette série peut remplacer l'accumulateur des véhicules.
PDFDemande de prix en ligne

Personnalisation en ligne selon votre besion>>

    Share
  • Normes des produits
  • Caractéristiques des produits
  • Paramètres des produits
  • Accessoires des produits
  • Service après-vente
  • Vidéo des produits
  • ISO 7637-2
  • ISO 16750-2

General description

The APG series is used to simulate the various battery supply waveforms recommended by international standards and by car manufacturer requirements. Especially the manufacturer requirements are an important area covered by the APG series as there is a large variety of needs. Secondly, the APG series work as powerful DC voltage supplies for the DUT during the tests with automotive transients. The APG series covers all three supply voltage categories. Their current capability ranges up to 100Aand test voltage up to 60V, depending on the model and the application area.

Features

5.7 inch color touch screen

Test voltage up to 60V

Test current up to 100A

Low output impedance

Be able to load current shock

Powerful DC voltage source

Automatic voltage compensation

Quick response, the bandwidth up to 5kHz

Pulses 4 and 2b as per ISO 7637-2:2004

Voltage variation test as per ISO 16750-2:2006

Pre-programmed test routines to simulate various supply waveforms

Ethernet, RJ45, PC control, and test report documentation and print


Technical Data

Output voltage

0 – max +60V

Voltage accuracy

±2%

Output current

Up to I max ±2% +1, continuous

Source impedance

< 10mohm

Voltage offset

< 1V(resistive load), recover 63% within 100us

Voltage variation

Ur< 0.2V P-P, min frequency 400Hz

Rise time

< 100us(resistive load)

Sinusoidal signal output

Frequency up to 5kHz(depending on Vpp and output current)

output

DUT is powered via high current connector

Serial interface

LAN Ethernet RJ45

Power supply

AC 110/220V, ±10%, 45 – 65Hz

Temperature

15 -35

humidity

35% - 85% (no condensation)

size

600×800×1200mm( 22U cabinet)

450×600×266mm(6U cabinet)

Technical Data

Software(optional)

Software AUTO Lab for software

With PC installed WIN XP and WIN7, it can be easily operated to make the measurement, based on the customized test program. It can identify any device for AUTO Lab test with automatic configuration. It can easily generate test reports.

Basic equipment

simulator, user manual, test report, cable, fuse, power cord

Basic equipment

simulator, user manual, test report, cable, fuse, power cord


Tel :4006 -0512-77


Video