General description
The APS series has been designed as a low-frequency signal source to generate pulse 2b, pulse 4, and sinusoidal pulse used to simulate ripple noise and ground shift noise as required by a variety of standards in the avionics, military and automotive industry. The APS series is controlled by either the Net wave for testing avionics, military and nautical standard requirements or the Auto wave for automotive testing. Additionally, the APS can be used to generate magnetic field by means of a radiation loop or small Helmholtz coils.
Features
5.7 inch color touch screen
Test voltage up to 60V
Test current up to 50A
Low output impedance
Be able to load current shock
Four-quadrant, bipolar output (optional)
Powerful DC voltage source
Automatic voltage compensation
Quick response, the bandwidth up to 100 KHz
Pulses 4 and 2b as per ISO 7637-2:2004
Voltage variation test as per ISO 16750-2:2006
Pre-programmed test routines to simulate various supply waveforms
To simulate various supply waveforms, e.g. superimposed noise
Ethernet, RJ45, PC control, and test report documentation and print
|
Technical Data |
|
|
Output voltage |
Max – 60V – max +60V+1 |
|
Voltage accuracy |
±2% |
|
Output current |
Up to I max ±2% +1, continuous |
|
Analog signal input |
BNC |
|
Sense signal input |
BNC |
|
Source impedance |
< 10mohm |
|
voltage compensation accuracy |
± 0.1V |
|
Max compensation voltage |
4V |
|
Voltage offset |
< 1V(resistive load), recover 63% within 100us |
|
Voltage variation |
Ur< 0.2V P-P, min frequency 400Hz |
|
Rise time |
< 10us(resistive load) |
|
Sinusoidal signal output |
Frequency up to 100KHz(depending on Vpp and output current) |
|
external signal input |
0- ±10V |
|
magnification ratio |
1:10 |
|
output |
DUT is powered via high current connector |
|
Serial interface |
LAN Ethernet RJ45 |
|
Power supply |
AC 110/220V, ±10%,45 – 65Hz |
|
Temperature |
15℃ -35℃ |
|
humidity |
35% - 85% (no condensation) |
|
size |
600×800×1200mm( 22U cabinet) |
|
450×600×266mm(6U cabinet) |
|
|
Technical Data |
|
|
Software(optional) |
|
|
Software AUTO Lab for software With PC installed WIN XP and WIN7, it can be easily operated to make the measurement, based on the customized test program. It can identify any device for AUTO Lab test with automatic configuration. It can easily generate test reports. |
|
|
Basic equipment |
|
simulator, user manual, test report, cable, fuse, power cord |
